63
Auto Power Off
When no buttons are pressed for a certain period of time while power is on, the
camera turns off automatically to conserve power. The default value is 1 minute.
1. Set the mode dial to [SET-UP] and power on the
camera.
2. Use the c or d button to select Auto PoFF.
3. Press the SET button.
The pull down menu for Auto Power Off is
displayed on the LCD monitor.
4. Use the c or d button to select the desired time
setting.
[1 Min]: If no operation is carried out for 1 minute, Auto power off is activated
(default).
[2 Min]: If no operation is carried out for 2 minutes, Auto power off is activated.
[3 Min]: If no operation is carried out for 3 minutes, Auto power off is activated.
5. Press the SET button to confirm the setting.
To Next Page
Loading...