EasyManuals Logo

Gateway DC-T50 User Manual

Gateway DC-T50
73 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
37
Photography in the Full Manual Mode [M]
This mode can set the aperture and shutter speed values separately before taking
a photograph. Both the aperture value and shutter speed can be changed by
rotating the Command dial.
1. Set the mode dial to [M] and power on the camera.
2. Adjust the aperture and shutter speed separately.
Press the [ ] button to select the aperture
or shutter speed. The available function is
dislayed in blue on the LCD monitor.
Rotate the Command dial to adjust the value.
3. Compose the picture, press the shutter button
down halfway, then press it down fully.
Photography in the Portrait Mode [ ]
Select this mode to make people stand out with the background out-of-focus. The
flash setting is fixed to red-eye reduction mode automatically.
1. Set the mode dial to [ ] and power on the
camera.
2. Compose the picture.
3. Press the shutter button down halfway, then
press it down fully.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Gateway DC-T50 and is the answer not in the manual?

Gateway DC-T50 Specifications

General IconGeneral
BrandGateway
ModelDC-T50
CategoryDigital Camera
LanguageEnglish