31
Changing the Exposure Compensation
This setting [ ] allows you to intentionally lighten or darken the entire image.
Use this setting when the optimum brightness (exposure) cannot be obtained, for
example, when the brightness between the subject and the background is not
balanced or when the subject to photograph occupies only an extremely small part
of the screen.
The [
] Exposure Compensation button can select “Normal capturing mode”,
“Backlight compensation capturing mode” and “Exposure compensation adjusting
mode” cycling.
1. Set the mode dial to one of [P], [Tv], [Av] and power on the camera.
2. Toggle the [
] button to select exposure compensation mode or backlight
compensation mode.
3. When exposure compensation mode is selected, rotate the Command dial to
adjust the exposure, and press the [ ] button again to confirm.
Rotate the Command dial in a counter-clockwise direction to decrease
(darken) the exposure, and rotate the Command dial in a clockwise direction
to increase (brighten) the exposure.
4. Compose the picture, press the shutter button down halfway, and press it down
fully.
To Next Page
Loading...
Need help?
General