4
WARNINGS
Do not use the camera if it is emitting smoke, unusual odor or noise, becoming
unusually hot to the touch, or if it is in any other abnormal state. Operating the
camera in any of these circumstances may cause a fire or an electrical shock.
Stop using the camera immediately, turn the camera off, and then disconnect
the power source. After checking that smoke is no longer being emitted, contact
Gateway for repairs. Never attempt to repair this camera by yourself, as this is
dangerous.
Do not use the camera if any foreign objects have entered the camera. Turn the
camera off and then disconnect the power source. Contact Gateway. Do not
continue to use the camera as this may cause a fire or an electrical shock.
Do not place the camera in any unstable locations such as on a wobbly table or
slopping surface where the camera may fall or tip over and cause damage.
If the camera has been dropped or if the camera case has been damaged, turn
the camera off and then disconnect the power source . Then contact Gateway.
Do not continue to use the camera as this may cause a fire or an electrical
shock.
Do not expose the camera to moisture and avoid getting water into the camera.
Take particular care when using the camera under extreme weather conditions
such as rain or snow, or when operating the camera at the beach or near water.
Water in the camera may cause a fire or an electrical shock.
Do not attempt to modify the camera. This may cause a fire or an electrical
shock.
Do not remove the camera casing. This may cause an electrical shock. Internal
inspection, maintenance and repairs should only be carried out by Gateway.
To Next Page
Loading...
Need help?
General