JF-240UV User Manual
9
1.5 Equipment Installation Precautions
GCC JF-240UV shall be installed in a relatively clean, free from dust environment and the surface
for the equipment to be installed shall be stable and flat. We suggest that you install the
equipment in an air-conditioned environment to control the appropriate temperature and
humidity. To ensure the equipment and the materials reach to the room temperature 24 hours
prior in operation. For the environment shall meet following conditions:
Prohibit on exposure under
direct sun light
Prohibit on setting up on tilt
surface
The operation environment
for this
equipment:
22 to 30°C (71.6°F to 86°F)
40% to 60% (humidity)
Avoid locations with vibration
Avoid locations with strong
air current
Avoid locations with flame
To Next Page
Loading...
