JF-240UV User Manual
80
5.2.5 External Software Printing Setups
Adobe Illustrator Windows
Color printing
1. Select “Document Setup” from the Adobe Illustrator “File” pull down menu :
a. Select “Artboard” from the pull down menu:
i. Select a standard sheet size from the Size field.
ii. To use customized sheet size:
(1) Select “Custom” from the Size field.
(2) Select the required “Units”.
(3) Enter the “Width” and the “Length” for the customized sheet size.
* To avoid from truncating image, please enter the accurate media size.
(4) Click on OK.
2. Select “Print” from the “File” menu.
a. Set the Name settings to the network printing queue corresponding to the required output
device.
b. Set the Copies as the required duplication.
c. Click on the Properties button.
d. Select Layout tab, and click on the Advanced button.
i. For the Advanced Options :
(1) To print the file automatically, please set the “After Spooling” as “Print”.
(2) To verify the print mode and profile settings, please set the “After Spooling” as “Hold”.
(3) To start the RIP but without carry out the printing, please set the “After Spooling” as “RIP”.
(4) Click on OK.
ii. Click on OK.
iii. Click on OK to start the printing.
To Next Page
Loading...
