GCC Technologies JF-240UV - Page 82

JF-240UV User Manual
81
CorelDRAW
1. Select “Print Setup” from the “File” menu in CorelDRAW.
a. Select printer from the “Name” field.
b. Click on the “Properties” button.
i. Select sheet size from the “Paper” field, or select “Custom Page” to use user defined
sheet size.
* According to the operating system and driver, it could be required to click on the
“Advanced” button to select the sheet size.
ii. To use customized sheet size:
(1) Select “PostScript Custom Page Size” from the Size field.
(2) Select the required Units.
(3) Enter the Width and the Height for the customized sheet size.
(4) Click on OK to leave the Advanced Option dialog box.
iii. Click on OK to leave the Properties dialog box.
c. Click on OK to leave the Print Setup dialog box.
2. Select “Print” from the File menu.
a. Set the Name setting to the network printing queue for the required output device.
b. For the General tab :
i. Set the “Print Range” settings as to the page range to be printed.
ii. Set the “Number of copies” settings to the duplication to be printed.
c. On the PostScript tab :
i. Select PostScript3 compatible.
d. On the Miscellaneous tab :
i. Select one of the following methods to output the bitmap as CMYK: uncheck the
“Output Bitmaps in RGB”. Set the “Output Color Bitmaps as” settings as CMYK.
* According to the actual operating system and driver version, the settings might show
up in somewhere else.
ii. Ensure uncheck the “Use Color Profile”.
* According to the actual operating system and driver version, the settings might name
as “Apply ICC profile”.
3. Click on the Print button.