1.Empty waste ink bottle.
2.Open the ink valves of print Head.
ENTER CANCEL
Start Ink Drain Procedure?
ENTER CANCEL
Close the ink valves of ink bottle as
shown
ENTER CANCEL
Ink purging…
1.Empty the waste ink bottle
2.Open the ink valves of print head
ENTER CANCEL
Flush purging
ENTER CANCEL
Check Flush solution level…
Low flush solution level.
Fill flush solution into flush ink bottle.
1.Use cotton swabs with Cleaner to
clean print head and print head area.
2.Empty the waste ink bottle.
ENTER CANCEL
The process is complete
ENTER
adequate ink
inadequate ink
1.Insert the chip of flush solution.
2.Seal the bottle caps.
ENTER CANCEL
To Next Page
Loading...
