GE Security TruVision DVR 10 User Manual

Chapter 5: Advanced setup
TruVision DVR 10 User Manual 59
Check the check box or use the Up or Down Arrow buttons and the ENTER button
to enable or disable these options.
5. To copy the alarm rules to another day, select a day in the Copy to list box and
click Copy.
6. Click Confirm on the Rules screen to save your setup.
Note: The TVR 10 will prompt you to reboot in order for the schedule to take
effect.
Display settings
Use the Display screen to configure how information is displayed on screen. The
following options can be configured:
• Device ID
• Password requirement option
• Video output standard
• Video scaling
• Menu transparency
• System time and date
• Multiscreen
Device ID
The device ID provides a means for an IR remote control to connect to the TVR 10. If
there is more than one TVR 10 in a setting, you must define a different device ID for
each TVR 10. Otherwise, the IR remote control will control all TVR 10s with the same
device ID at the same time. The default device ID is 01.

GE Security TruVision DVR 10 Specifications

General

Brand	GE Security
Model	TruVision DVR 10
Category	DVR
Language	English