GE Security TruVision DVR 10 User Manual

Chapter 6: Utilities settings
84 TruVision DVR 10 User Manual
3. The default unit name is “TruVision Recorder.” Click the Unit Name edit box to
enter into edit mode.
4. Enter the new unit name.
See “
Using an edit box” on page 22 for more information on entering text.
5. Click the edit box to exit the edit mode.
6. Click Confirm to save your changes.
Restoring to factory defaults
Use the Factory Defaults Restore button on the Utilities screen to restore the TVR 10
to its factory settings. Click Confirm at the prompt to confirm your changes, as shown
in Figure 32 below, and the system will automatically reboot.
Figure 32: Restore parameters

GE Security TruVision DVR 10 Specifications

General

Brand	GE Security
Model	TruVision DVR 10
Category	DVR
Language	English