System Presets
LOGIQ E9
–
User Guide
3-23
Direction 5454884-100 English
Rev. 1
Keyboard Setup for Russian/Greek Languages (continued)
8. The “Change System Locale” pop-up prompt appears.
Press “Cancel.” Press “Close.” The “Change System
Locale” pop-up prompt appears again. Press “Cancel”
again. Press “Exit.
Figure 3-10. Change system locale
9. Reboot the system. When your system restarts, the system
appears in the selected language.
NOTE: To have the settings take effect, you MUST turn off the system
and turn it back on.
NOTE: Service password does not work for Greek and Russian
language settings. Change the setting to English.
To Next Page
Loading...
