GE LOGIQ E9

System Care and Maintenance
LOGIQ E9 – User Guide 3-59
Direction 5454884-100 English Rev. 1
LCD
LCD Monitor
To clean the LCD Monitor:
1. Moisten a soft, non-abrasive folded cloth with a mild,
general purpose, non-abrasive soap and water solution.
NOTE: The cloth should be damp, not dripping wet.
2. Wipe down the top, front, back, and both sides of the LCD
Monitor.
3. Wipe off excess cleaning agents.
NOTE: Never use thinner, benzene, alcohol (ethanol, methanol, or
isopropyl alcohol), abrasive cleaners, or other strong solvents,
as these may cause damage to the LCD Monitor.
LCD Frame
To clean the LCD frame:
1. Moisten a soft, non-abrasive folded cloth with a mild,
general purpose, non-abrasive soap and water solution.
NOTE: The cloth should be damp, not dripping wet.
2. Wipe down the top, front, back, and both sides of the LCD
Frame.
3. Wipe off excess cleaning agents.
Other acceptable cleaning agents are:
• Ammonia
• Bleach (10 to 1 ratio of 5% home bleach)
• Hydrogen Peroxide / Hydrogen Peroxide Wipes
NOTE: DO NOT scratch or press on the panel with any sharp objects,
such as pencils or pens, as this may result in damage to the
panel.