GE LOGIQ E9 User Guide

After the Exam is Over
3-64 LOGIQ E9 – User Guide
Direction 5454884-100 English
Rev. 1
Cleaning the Air Filters
Clean the system's air filters to ensure that a clogged filter does
not cause the system to overheat and reduce system
performance and reliability. It is recommended the filters be
cleaned quarterly (once every three months).
Locating
The LOGIQ E9 has two air filters which need to be cleaned. The
top air filter (A) is located on the back of the LOGIQ E9 below
the power cord and the bottom air filter (B) is located underneath
the LOGIQ E9.
Figure 3-18. Location of Air Filters
CAUTION
Be sure to lock the wheels before cleaning the air filters to
avoid injury by any unexpected movement of the system.

GE LOGIQ E9 Specifications

General

Type	Ultrasound System
3D/4D Imaging	Yes
Transducer Ports	4 active ports
Connectivity	DICOM, USB, Ethernet
Applications	Abdominal, Vascular, Musculoskeletal, Small Parts, Urology, Pediatric, Cardiac, Obstetrics/Gynecology
Transducers	Linear, Convex, Phased Array, Volume
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Elastography	Yes
Advanced Features	B-Flow, Volume Navigation
Portability	Cart-based system
Display	19-inch high-resolution LCD monitor