GE HEALTHCARE
DIRECTION 5245279, REVISION 3 LOGIQ™ P6/P6 PRO SERVICE MANUAL
8 - 142 Section 8-4 - Software Installation
8-5-3 Full Backup Procedure (cont’d)
12.)If USB HDD with enough space is not already plugged in, plug in one.Then press Next
13.)Press next to continue. Then the below windows appear.
14.)Verify that "Backup was completed!" message is displayed.
15.)Press Finish to complete.
Figure 8-213 Storage Information
Figure 8-214 Emergency Disk Making Preparation
Figure 8-215 Emergency Disk Making in Progress
To Next Page
Loading...
