GE LOGIQ V2 User Guide

Performing an Exam
2-42 LOGIQ V2/LOGIQ V1 – User Guide
Direction 5610736-100
Rev. 9
Using SonoBiometry (continued)
NOTE: If a particular image is not supported for SonoBiometry
measurement, a warning message appears: “Not able to
proceed on the image supplied”.
NOTE: If a particular scanned image does not have valid fetus data, a
warning message appears: “No valid ‘auto measurement’ found
- proceed with a manual measurement!”.
You can not use SonoBiometry (AFB) measurements on the
following images:
• Images displayed in Dual/Quad view. In these views, an
SonoBiometry (AFB) measurement will change to manual
measurement automatically.
• Zoomed image.
• Rotated image.

GE LOGIQ V2 Specifications

General

Brand	GE
Model	LOGIQ V2
Category	Medical Equipment
Language	English