GE LOGIQ V2

Getting Started
1-30 LOGIQ V2/LOGIQ V1 – User Guide
Direction 5610736-100
Rev. 9
Attaching the Security Cable
To ensure that the LOGIQ V2/LOGIQ V1 is not removed from
the premises, attach the security cable.
1. Wrap the cable around an immovable object.
Figure 1-18. Security Cable
2. Be sure to rotate the key to the unlocked position (to the
right).
3. Insert the lock into the security slot to the system’s rear side.
Figure 1-19. LOGIQ V2/LOGIQ V1 with Security Cable
4. Rotate the key to the locked position (to the left).