System Care and Maintenance
LOGIQ V2/LOGIQ V1 – User Guide 3-37
Direction 5610736-100 Rev. 9
Inspecting the System
• Connectors on cables for any mechanical defects.
• Entire length of electrical and power cables for cuts or
abrasions.
• Equipment for loose or missing hardware.
• Control panel and keyboard for defects.
• Trackball movement
If the trackball is dusty, please clean it.
To avoid electrical shock hazard, do not remove panels or
covers from console. This servicing must be performed by
qualified service personnel. Failure to do so could cause
serious injury.
If any defects are observed or malfunctions occur, do not
operate the equipment but inform a qualified service person.
Contact a Service Representative for information.
To Next Page
Loading...
