GE LOGIQ V2

Getting Started
1-44 LOGIQ V2/LOGIQ V1 – User Guide
Direction 5610736-100
Rev. 9
When moving the system
• Always use the handle to move the system.
Transporting the System
Use extra care when transporting the system using vehicles. In
addition to the instructions used when moving the system (see
‘Before moving the system’ on page 1-43 for more information),
also perform the following:
1. Before transporting, place the system in its special storage
case.
2. Ensure that the system is firmly secured while inside the
vehicle.
CAUTION
The system weighs approximately 6 kg (13.23 lbs). To avoid
possible injury and equipment damage:
• Do not let the system strike walls or door frame.