Getting Started
1-40 LOGIQ V2/LOGIQ V1 – User Guide
Direction 5610736-100
Rev. 9
LCD Monitor
Locking/unlocking the LCD monitor
The LCD monitor will be locked automatically when the system
is closed with a little force.
Push and slide the LCD latch slider to the right and hold on to
unlock the LCD, LCD monitor can be opened.
Figure 1-27. Unlock the LCD Monitor
Adjusting the LCD monitor
The LCD monitor position can be adjusted for easy viewing.
• Tilt the LCD monitor for the optimum viewing angle. The
maximum angle is 170.
NOTE: Bright light could impact readability of screen.
To avoid damage, DO NOT push the LCD monitor over the
maximum opening angle.
DO NOT scratch or press on the panel with any sharp
objects, such as a pencil or pen, as this may result in
damage to the panel.
To Next Page
Loading...
