GE LOGIQ V2

Measurement and Analysis
LOGIQ V2/LOGIQ V1 – User Guide 2-67
Direction 5610736-100 Rev. 9
Defining Hot Keys
There are 10 alphanumeric keys that are programmable as hot
keys to store frequently-used measurements.
1. In the Hot Key field, select the desired hot key (Z, X, C, V, B,
N, M, , , . or / ) for the appropriate Measure Study by
pressing the up/down arrow key on the monitor display.
2. Ensure that the “Enable Hot Key” preset has been selected
in the Key Usage portion of the Utility -> System -> General
preset menu.
NOTE: Defined hot keys are listed on the Measurement Summary
Window.
Figure 2-33. Hot keys for measurements