GE LOGIQ V2

Getting Started
1-20 LOGIQ V2/LOGIQ V1 – User Guide
Direction 5610736-100
Rev. 9
Battery Removal
To remove the battery from the bottom cover of the system:
1. Shut down the system and disconnect the AC/DC power
cord.
2. Push up the battery lock to another end of the slot. While
hold on to the lock without release, put another hand at the
embossed position on the battery and push the battery in
the direction away from the battery box.
Figure 1-15. Unlock and push the battery
3. When the battery is released from the lock, remove it from
the battery box.
Figure 1-16. Remove the battery