GE LOGIQ V2

Beginning an Exam
LOGIQ V2/LOGIQ V1 – User Guide 1-77
Direction 5610736-100 Rev. 9
End Exam
For R1.0.x software:
End Exam should be selected at the end of each exam. The
system will automatically store all images of current patient
permanently.
The system creates the new patient and the new folder to store
all images in the archive screen. Each patient has only one
folder per day, regardless how many exams are performed in
that day.
For R1.1.x software:
To end a patient:
Press Patient -> New Patient, then select Store All in the
pop-up menus to store exam data.