GE LOGIQ V2

After the Exam is Over
3-6 LOGIQ V2/LOGIQ V1 – User Guide
Direction 5610736-100
Rev. 9
Foreign Language and Keyboard Setup (For R1.0.x) (continued)
6. In the Regional and Language Options screen, select OK,
select No in the following pop-up message.
Figure 3-6. Restart Message
7. In Utility--> System--> General -> Location -> Language, set
the Language as desired.
Figure 3-7. Location
8. Press Save, select OK in the pop-up message.
Figure 3-8. Restart Message