Safety Precautions
LOGIQ V2/LOGIQ V1 – User Guide 4-13
Direction 5610736-100 Rev. 9
Related Hazards (continued)
DO NOT touch the patient and any of the connectors on the
ultrasound unit simultaneously, including ultrasound probe
connectors.
DO NOT touch the conducting parts of the USB, Ethernet,
Video, Audio cables when connecting equipment to the unit.
To minimize accidental loss of data, perform EZBackup and
Backup on a regular basis.
1. First, perform EZBackup to save the images.
2. Next, perform Backup at Utility -> Backup/Restore. Enable
the following checkboxes under Backup:
• Patient Archive
• Report Archive
• User defined configuration
• Service
• DO NOT scratch or press on the panel with any sharp
objects, such as a pencil or pen, as this may result in
damage to the panel.
• To avoid injury or damage, make sure nothing is within the
range of motion before moving the system. This includes
both objects and people.
• The LCD screen may have defective pixels. These pixels
may appear as a slightly light or dark area on the screen.
This is due to the characteristics of the panel itself, and not
the product.
• The backlight of the LCD panel has a fixed life span. When
the screen becomes dark or begins to flicker, contact a
qualified Service Representative for information.
To Next Page
Loading...
