GE LOGIQ V2

Using Onboard Help
6-16 LOGIQ V2/LOGIQ V1 – User Guide
Direction 5610736-100
Rev. 9
Figure 6-17. Language selection
7/9 After add desired language, select the
language under Default input
language. Select OK and then select
Apply.
8/9 Press Utility and then select the
System tab. Next select the General
Tab. Select Language under
Location. This is where the language
from English to Chinese can be
configured. Select Save. A indication
for re-start is followed. Select OK.
9/9 When the system boots up, the
system appears in the selected
language.