GE LOGIQ V2 User Guide

Onboard Help
LOGIQ V2/LOGIQ V1 – User Guide 6-21
Direction 5610736-100 Rev. 9
Figure 6-19. User preset set-up
4/6 To save this as a default preset, press
the Preset key on the control panel.
5/6 Click user preset menu. A pop-up
menu appears on the monitor. Enter
the name of the new preset, and click
to highlight the User1. Click on Save
when finished. The menu will
automatically close.
6/6 The next time the Preset key of the
control panel is pressed, the user
defined preset of Gyn01 will be
displayed confirming it was
successfully created and saved.

GE LOGIQ V2 Specifications

General

Brand	GE
Model	LOGIQ V2
Category	Medical Equipment
Language	English