GE LOGIQ V2

Using Onboard Help
6-32 LOGIQ V2/LOGIQ V1 – User Guide
Direction 5610736-100
Rev. 9
Figure 6-24. Connect to a Printer
3/5 Third, select the System tab in Utility,
and then select the Peripherals tab.
Select the HP Universal Printing
PCL6 as the default printer. Click Save
and Exit Utility.
4/5 The first time the Print button that was
configured is pressed, a HP Universal
Printing PCL6 menu pops up.
Select Enter a Printer Address...
button. A pop-up menu will ask you to
enter a printer address.
5/5 A confirmation will be displayed when
the printer address is accepted.