GE P444

P44x/EN SC/H
b6
SCADA Communications
(SC) 12
-4 MiCOM P40 Agile
P442, P444
3.7.1 Password protection 30
3.7.2 Control and support settings 30
3.7.3 Protection and disturbance recorder settings 30
3.8 Date and time format (data type G12) 31
3.9 Power & energy measurement data formats (G29 & G125) 32
3.9.1 Data type G29 32
3.9.2 Data type G125 33
4 IEC 60870-5-103 INTERFACE 34
4.1 Physical connection and link layer 34
4.2 Initialization 34
4.3 Time synchronization 34
4.4 Spontaneous events 35
4.5 General interrogation 35
4.6 Cyclic measurements 35
4.7 Commands 35
4.8 Test mode 35
4.9 Disturbance records 35
4.10 Blocking of monitor direction 35
5 DNP3.0 INTERFACE 36
5.1 DNP3.0 protocol 36
5.2 DNP3.0 menu setting 36
5.3 Object 1 binary inputs 36
5.4 Object 10 binary outputs 36
5.5 Object 20 binary counters 37
5.6 Object 30 analog input 37
5.7 DNP3.0 configuration using MiCOM S1 Agile 37
5.7.1 Object 1 37
5.7.2 Object 20 37
5.7.3 Object 30 38
6 IEC 61850 ETHERNET INTERFACE 39
6.1 Introduction 39
6.2 What is IEC 61850? 39
6.2.1 Interoperability 39
6.2.2 The data model 39
6.3 IEC 61850 in MiCOM relays 40
6.3.1 Capability 40
6.3.2 IEC 61850 Configuration 41
6.4 The data model of MiCOM relays 42
6.5 The communication services of MiCOM relays 42
6.6 Peer-to-peer (GSE) communications 42
6.6.1 Scope 42
6.6.2 IEC 61850 GOOSE configuration 43