GE P444

Getting Started
P44x/EN GS/Hb6
MiCOM P40 Agile P442, P444
(GS) 3-
3
CONTENTS
1 GETTING STARTED 5
1.1 User interfaces and menu structure 5
1.2 Introduction to the relay 5
1.2.1 Front panel 5
1.2.2 Relay rear panel 6
1.3 Relay connection and power-up 8
1.4 Introduction to the user interfaces and settings options 8
1.5 Menu structure 9
1.5.1 Protection settings 10
1.5.2 Disturbance recorder settings 10
1.5.3 Control and support settings 10
1.6 Password protection 10
1.7 Relay configuration 12
1.8 Front panel user interface (keypad and LCD) 13
1.8.1 Default display and menu time-out 14
1.8.2 Menu navigation and setting browsing 15
1.8.3 Hotkey menu navigation 16
1.8.4 Password entry 17
1.8.5 Reading and clearing of alarm messages and fault records 18
1.8.6 Setting changes 18
1.9 Front communication port user interface 19
1.10 Introduction to the Settings Application Software 20
1.10.1 Getting Started 20
1.10.2 PSL editor 23
1.10.3 IEC 61850 Configurator 23
1.10.4 DNP3 configurator 23
1.10.5 S&R courier 23
1.10.6 AEDR2 24
1.10.7 WinAEDR2 24
1.10.8 Wavewin 24
1.10.9 Device (Menu) Text Editor 24
1.10.10 Event viewer 25