pplication Notes
P74x/EN AP/N
1, P742, P743 (AP) 6-
5.5 Waiting Configuration
Alarm “Config error” occurs when the configuration is incorrect:
• Topology download in relay does not correspond to this relay address
(be careful to erase topology by sending a default setting file)
• For CU: check the coherency of threshold:
[IDCZ>2] > [ID>1] and [ID>2] > [ID>1] and [IDNCZ>2] > [IDN>1] and [IDN>2] > [IDN>1]
To Next Page
Loading...
Need help?
General
