Getting started
94 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
To swivel the control panel left or right
1. Pull and hold the left brake handle, located under the
control panel.
The control panel can now be freely rotated left or right.
2. When reaching the desired swivel angle, release the
swivel-brake handle.
The control panel will remain at the set angle.
Note: The LCD monitor will swivel together with the
control-panel. In addition the LCD may be swiveled
independently of the control-panel.
To move the control panel up or down
1. Pull and hold the right-hand handle, located under the
control panel.
The control panel can now be freely adjusted up or down.
2. When reaching the desired height, release the
height-adjust handle.
The control panel will remain at the set height.
Note: When the control panel is lowered it moves towards the
operator. When panel is raised it also moves away from the
operator.
Note: When preparing the system to be moved, pull the left
handle and bring the control panel to a center position. Swivel it
slightly till a locking click is heard.
To Next Page
Loading...
