Presets and System setup
588 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
Starting the Configuration package
To access the Configuration package the user has to log on as
a specific user (see page 637). This ensures user-specific and
user-defined settings and presets to be used.
The access to the entire configuration package is user
configuration dependent (see page 637).
To open the Configuration package
1. Press CONFIG on the alphanumeric keyboard.
The Log In window is displayed asking for operator ID and
password (see Figure 13-1).
2. Select Log on when completed.
The Setup dialogue window is displayed (see Figure 13-2).
Figure 13-1: The Operator login window
1. Select the operator
2. Type password
To Next Page
Loading...
