Scanning Modes
Vivid S5/Vivid S6 User Manual 179
R2424458-100 Rev. 2
Strain rate controls
Strain rate assignable controls
2D width
Controls the angular width of the 2D image sector.
SRI scale
Defines the scale for the color coding of the strain rate.
Frame rate
Controls the line density. When adjusting frame rate, there is a
trade off between spatial and temporal resolution.
Invert
Enables the color scheme assigned to strain rate to be
inverted. Invert is available in live and cine replay.
TSI
Starts TSI mode (see page 188).
Simultaneous
Enables simultaneous display of 2D image and 2D image with
Strain rate color.
Color maps
Displays a menu of color map options. Use the trackball to
point a color map and press
SET to activate a desired color
map.
Q-analysis (in Freeze only)
Starts the Quantitative analysis application (see Chapter 8,
"Quantitative Analysis" on page 375).
Cineloop (in Freeze only)
Starts cineloop acquisition.
Alternative assignable controls
Press ALT to access to the following modes:
• Curved Anatomical M-Mode (see page 155)
• Tissue Synchronization Imaging (see page 188)
• Tissue Tracking (see page 173)
To Next Page
Loading...
