Quantitative Analysis
Vivid S5/Vivid S6 User Manual 393
R2424458-100 Rev. 2
Reshaping a sample area from the assignables
This procedure allows to reshape either a free sample area or a
specific anchored sample area providing that the QA cursor is
pointing at the actual sample area.
1. Press the
SAMPLE SHAPE assignable.
The Sample shape assignable controls are displayed.
2. Adjust the size and angle of the sample area using the
assignable rotaries.
3. If desired press the assignable
SET DEFAULT to keep the
settings as default.
Labelling a sample area
The sample area label is used to identify data associated to the
sample area when exporting to a spreadsheet program.
1. If necessary, press
TRACKBALL until the QA trackball
assignment is selected.
2. Trackball to the sample area to label.
3. Press
UPDATE MENU in the trackball area on the control
panel.
The System menu is displayed.
4. Trackball to Label Sample area....
5. Press
SET.
A Dialogue window with a free text field is displayed (see
Figure 8-4).
6. Type a name for the sample area.
7. Press OK to return to the Quantitative analysis screen.
Figure 8-4: The sample area labelling window
1. Free text
To Next Page
Loading...
