GE Vivid S5 - Deleting Archived Information

Archiving
422 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
Deleting archived information
Only user logged in
with full operator
rights can delete pa-
tient records (see
page 637 for further
information).
To delete a patient record
1. Press PATIENT on the Front panel.
2. Select Patient List.
The Search/Create Patient window is displayed
(Figure 9-8, page 415).
3. Type the patient Last Name, and/or ID.
4. Trackball to the actual patient record.
5. Press
SET to highlight the patient record to delete.
6. Press Delete in the Search/Create Patient window.
A dialogue box is displayed asking for confirmation of the
deletion (Figure 9-13).
7. Trackball to OK and press
SET on the control panel.
Figure 9-13: Delete patient record confirmation prompt
To delete an examination
1. Press PATIENT on the Front panel.
2. Select Patient List.
The Search/Create Patient window is displayed
(Figure 9-8, page 415).
3. Type the patient Last Name, and/or ID depending on
system configuration.
4. Trackball to the actual patient record and double-click the
Trackball
SET key (or press SET once and SELECT PATIENT)
to select the patient.
The Examination list window is displayed.
5. Trackball to the examination to delete.
6. Press the trackball
SET key.