Basic scanning operations
108 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
Trackball operation
Different functions can be assigned to the trackball depending
on the current active mode. The trackball functions are
organized in functional groups. The trackball functional groups
are displayed in the lower right corner of the screen. Each
group can have one or more controls that can be selected
using the keys on the trackball area as described below.
The trackball area consists of:
• The trackball: used as a cursor control in acquisition mode,
scrolling control in freeze mode and as a selecting tool (like
a mouse cursor) in post-processing mode.
• Three SET keys (identical): depending on the situation,
the
SET keys toggle between the trackball functions within
the active functional group or perform the selected control
or highlighted menu item.
• The
TRACKBALL key: toggles between the trackball
functional groups.
• The
UPDATE MENU key: enables quick access to various
functions form a pop-up menu (see Figure 3-3).
Trackball assignment
The trackball has a multi-mode function. The functions
available from the trackball are mode dependent. The available
trackball functions for the active mode are displayed on the
right side of the Status line (Figure 3-3).
To change trackball assignment
• Press TRACKBALL in the Trackball area until the desired
function is selected highlighted.
To Next Page
Loading...
