GE Vivid S5 - A Stand-Alone Scanner and a Stand-Alone Echopac PC Environment

Archiving
Vivid S5/Vivid S6 User Manual 435
R2424458-100 Rev. 2
A stand-alone scanner and a
stand-alone EchoPAC PC environment
In this scenario the EchoPAC PC (one or several) is used for
review of studies acquired on one or more Vivid S5/Vivid S6
without being connected via a private or a local area network.
Images can be stored on the scanner’s internal hard drive
(recommended), on a dedicated MOD, or on a CD/DVD.
Images stored on the internal hard drive
Figure 9-25: A stand alone scanner and a stand alone EchoPAC PC
environment with images stored on the scanner’s hard drive
In this configuration images are first stored on the scanner’s
hard drive and then exported from the scanner’s hard drive to a
MOD and finally imported from the MOD to the EchoPAC PC’s
internal hard drive.
Data management
Scanner’s dataflow configuration
• Select the LocalArchive-Int.HD dataflow as default
dataflow.
The local database is used for patient archiving. Images
are stored to internal hard drive.
Export from Vivid S5/Vivid S6
• Export the data (images, demographics, measurements
Vivid S5/Vivid S6: dataflow LocalArchive-IntHD
EXP: export from LocalArchive-Int.HD to Removable MOD Archive
IMP: import from Removable MOD Archive to LocalArchive-Int.HD
EchoPAC PC: dataflow LocalArchive-Int.HD