Archiving
468 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
Running the Disk management function
The Disk management function can be run at any time. In
addition, the user may be prompted to run Disk management if
the time since the last Disk management operation performed
has reached the setting for the Reminder interval (see
page 466), or if the local hard drive is about to reach its
capacity limit.
Manual start of disk management
1. Press PATIENT on the control panel, then select Patient list.
The Search/Create patient window is displayed.
2. Press More in the Search/Create patient window to display
additional menu options and select Disk management.
The Disk management welcome screen is displayed
(Figure 9-48). The Disk management operation will either
copy, remove or delete files from the local archives
depending on the Disk management configuration (see
page 465). Make sure that the correct configuration is set.
Figure 9-48: The Disk management welcome screen
3. Press Next.
The Storage size information window is displayed
(Figure 9-49). Verify the information displayed. If using
removable media, the operation may require several
To Next Page
Loading...
