Presets and System setup
626 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
• Export of report templates
• Save as function for images
• Save as function for reports
To define a remote path
1. Press Utility/Config on the Touch panel and log on as
administrator if required.
2. Select the Connectivity category and Tools subgroup. The
Tool sheet is displayed.
3. Enter a remote path of a shared folder on the network.
To check the connection, press Check.
Creation of a DICOM directory
1. Insert the media in the drive.
2. Select Repair DICOM DIR.
Wait for the display of the Information window indicating
that the process is completed.
Formats
The Formats sublevel enables configuration of the Examination
list window (see Figure 9-10, page 418) and other tools related
to patient management, as described below.
To Next Page
Loading...
