Safety
Vivid S5/Vivid S6 User Manual 31
R2424458-100 Rev. 2
Patient safety
Patient identification
Always include proper identification with all patient data and
verify the accuracy of the patient's name and/or identity number
when entering such data. Ensure that the correct patient ID is
provided on all recorded data and hard copy prints.
Identification errors could result in an incorrect diagnosis.
Note: For further information on patient identification, see
"Starting an examination" on page 95.
Diagnostic information
The images and calculations provided by the system are
intended for use by competent users, as a diagnostic tool. They
are explicitly not to be regarded as the sole, irrefutable basis for
clinical diagnosis. Users are encouraged to study the literature
and reach their own professional conclusions regarding the
clinical utility of the system.
The user should be aware of the product specifications and of
the system accuracy and stability limitations. These limitations
must be considered before making any decision based on
quantitative values. If in doubt, the nearest GE Medical
Systems Service Office should be consulted.
Equipment malfunction or incorrect settings can result in
measurement errors or failure to detect details in the image.
The user must become thoroughly familiar with the operation of
the unit in order to optimize its performance and to recognize
possible malfunctions. Application training is available through
the sales representative.
WARNING
The concerns listed in this section can seriously affect the safety
of the patient undergoing a diagnostic ultrasound examination.
CAUTION
Be certain to ensure privacy data of patient information.
To Next Page
Loading...
