Getting started
90 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
Adjusting the Display Monitor
Image Adjustment
Adjusting the monitor's contrast and brightness is one of the
most important factors for proper image quality. If these
controls are set incorrectly, the Gain, TGC, Dynamic Range
and even Power Output may have to be changed more often
than necessary to compensate.
On Vivid S6 it is recommended to activate the automatic
screen-adjustment feature for best results. When the screen
auto-adjustment is not active, the LCD screen controls may
need periodic adjustment due to changes in ambient light. On
the bottom right corner of the screen you should be able to see
a faint dark, yet visible, letter V which is called "Watermark"
(see Figure 2-12, item 22). If the watermark is not visible it is
because the screen is adjusted too dark relative to the
surrounding bright ambient light conditions. In this situation the
screen brightness should be adjusted.
Note: For best results make sure the watermark is always
visible.
Using LCD adjustment Soft menu Controls
When pressing the LCD button on the alphanumeric keyboard,
a special soft-key menu will appear. This menu contains
various screen controls which allow the user to optimize the
screen setting.
Note: On the LCD monitor, the brightness adjustment comes
before contrast.
Brightness Rotary
This is the main control to adjust screen brightness to
compensate for different ambient light.
When soft-rotary is rotated the brightness adjustment tool
appears at bottom of screen, as shown in Figure 2-14.
Figure 2-14: Brightness control
To Next Page
Loading...
