Getting started
Vivid S5/Vivid S6 User Manual 91
R2424458-100 Rev. 2
In a totally dark room it is recommended to set brightness down
all the way (all rectangles are empty).
Make sure the wa-
termark is visible at
all time.
When ambient light becomes brighter and watermark becomes
less visible, increase the brightness till watermark is visible
again.
Contrast Rotary
This control is used to adjust screen contrast.
When soft-rotary is rotated the Contrast adjustment tool
appears at bottom of screen, as shown in Figure 2-15.
Figure 2-15: Contrast control
Make sure the wa-
termark is visible at
all time.
In a totally dark room it is recommended to lower the contrast
somewhat. In a well-lit or semi-lit room it is recommended to
set contrast to its maximal setting.
Blue Tint Rotary
This control is used to adjust blue-tint or color-temperature of
the white colors.
When soft-rotary is rotated the Blue-tint adjustment tool
appears at bottom of screen, as shown in Figure 2-16.
Figure 2-16: Blue tint control
This may be adjusted to suite your preference.
External screen button
Activate this button when connecting the system to an external
display. It will allow you to optimize Contrast / Brightness and
blue-tint to suit the particular external display.
When the button is de-activated, the previous settings that
were optimized for the internal display will be restored.
To Next Page
Loading...
