Getting started
92 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
Test pattern
When adjusting an external display or any peripheral hard-copy
device, you may turn this function ON to generate a
screen-calibration pattern.
Using Automatic Brightness adjustment
On Vivid S6 it is possible to set up the Automatic screen
adjust feature. This will attempt to maintain a well-adjusted
screen under all ambient light conditions by using a special
built-in light-sensor.
Auto-sensor button
In case Brightness
setting is re-adjust-
ed manually the
Auto sensor feature
will be turned off.
When this button is turned ON, the system will monitor and
automatically adjust screen's brightness when ambient light
conditions have changed.
It is recommended to leave the Auto-Sensor ON by default for
the duration of the system's operation.
Auto Adjust button
When this button is depressed the system will perform a
one-time screen adjustment, based on the current ambient
light.
Position Adjustment
The monitor position can be adjusted for easy viewing.
• The monitor can be rotated around its central pivot point.
• The monitor can be tilted for the optimum viewing angle.
• The monitor can be flipped forward to a horizontal position
for screen-protection, improved visibility and reduced
height while moving or transporting the system.
To swivel the LCD monitor
Grab the left and right sides of the LCD monitor frame and
swivel the monitor to the desired position.
CAUTION
Do NOT place objects on the monitor.
To Next Page
Loading...
