Getting started
Vivid S5/Vivid S6 User Manual 99
R2424458-100 Rev. 2
Using other ID
The Vivid S5/Vivid S6 system supports an additional field for
Patient ID number referred to as "Other Patient ID". This is an
optional data field and may be accessed via the Patient List
screen and clicking the "More" button. The rules applicable to
the "Patient ID" data and the "Patient ID" filter also apply to the
"Other Patient ID" field.
The "Other Patient ID" field is part of the DICOM protocol and if
used, will appear on the patient demographic data viewed on
DICOM viewers.
Ending an Examination
1. Press PATIENT.
The Patient Handling screen is displayed.
2. Select End Exam on the Patient Handling Screen
(Figure 2-18).
If the images on the clipboard were not previously stored a
prompt window is displayed where the user can choose to
store all, none or a selection of the images saved to the
clipboard.
3. Select:
• All: to store all images and end the exam
• None: to end the exam without storing any images
• Select: to select the images to store from the Review
screen and end the exam.
Connectivity on the Vivid S5/Vivid S6
ultrasound unit
Refer to page 431
for further informa-
tion on connectivity
setup.
The connectivity on the Vivid S5/Vivid S6 Ultrasound unit is
based on the Dataflow concept. A Dataflow is a set of
pre-configured services (e.g. DICOM services like storage,
worklist, verify etc. or other service types like video print,
standard print or messaging). When starting an examination,
the user selects a pre-configured Dataflow that will
automatically customize the ultrasound unit to work according
to the services associated to the Dataflow.
To Next Page
Loading...
