GE Vivid S5 - Page 232

Stress Echo
214 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
Figure 5-8: Image selection from the Protocol screen
Manual selection of images in the Analysis screen
1. When currently in protocol analysis in the Stress analysis
quad screen (Figure 5-9), hold down
SHIFT while performing
steps 2 to 4.
2. Trackball to the first image to select in the Template matrix.
3. Press
SET.
The selected loop is displayed in the Stress analyze
screen and the next window in the quad screen is
automatically selected.
4. Repeat steps 2 and 3 to select other images.
5. Depress
SHIFT.
Manual selection of images in the Protocol screen
1. In a stress examination, press
PROTOCOL.
A preview of the acquisitions is displayed.
2. Trackball to the first image to select.
3. Press
SET.
The frame of the selected loop is highlighted.
4. Repeat steps 2 and 3 to select other images.
1. Select a Projection
2. Select an image
3. Select and open an Image group