Measurement and Analysis
Vivid S5/Vivid S6 User Manual 325
R2424458-100 Rev. 2
2. Double-click the SET key to select the anchor point.
The selected marker turns green and is unanchored.
3. Reposition the marker using the Trackball.
4. Press
SET to anchor.
Deleting a 2D Length measurements
1. While the measurement is on the screen, Trackball the
cursor to one of the anchor points of the measurement.
The selected marker turns green.
2. Press Delete on the alphanumeric keyboard.
Single Length parameter measurement
To measure one of the Single-length parameters shown in
Table 7-3 above, follow the procedure "Single diameter
parameter measurement" on page 324.
Circumference parameter measurement
When selecting one of the Circumference parameters shown
in Table 7-4 above, the system will automatically provide an
Ellipse tool to perform the measurement.
Table 7-3: Single length parameters
Parameter Full name
CRL crown rump length
FL femur length
Tt foot length
HL humerus length
SL spinal length
tibia tibia length
Ulna ulna length
Table 7-4: Circumference parameters
Parameter Full name
AC Abdominal Circumference
HC Head Circumference
To Next Page
Loading...
