Measurement and Analysis
Vivid S5/Vivid S6 User Manual 339
R2424458-100 Rev. 2
A list of all available measurements for the selected folder
is displayed in the Measurement menu sheet.
4. Check the box in front of AV Diam.
The AV Diam measurement is displayed in the folder
Dimension in the Measurement menu.
5. For the AV VTI measurement, check Doppler in the
Measurement menu sheet and select the folder Aortic in
the Measurement menu.
6. Check the box in front of AV Trace.
The AV Trace measurement is displayed in the folder
Aortic in the Measurement menu.
Figure 7-47: Configuration of the Measurement menu
1. Select the scanning mode for the measurement to add to the Measurement menu.
2. Select the folder for the measurement to add.
3. Select the measurement to add.
To Next Page
Loading...
