Measurement and Analysis
344 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
Creation of a user-defined folder
Figure 7-50: The Measurement menu sheet
1. Press CONFIG and select the category Meas/Text.
2. MCO and AVET are Doppler measurements, select
Doppler in the Measurement menu sheet.
3. Select Add folder.
4. Give the folder a name (e.g. “My Folder”).
Adding measurements
Figure 7-51: The Measurement menu sheet
1. Select the user-defined folder (e.g. “My Folder”) in the
1. Select the appropriate scanning mode.
2. Create a folder in the Measurement menu.
1. Select the user-defined folder.
2. Press Add measurement.
To Next Page
Loading...
