Measurement and Analysis
348 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
5. Check Blank and press OK.
The Measurement menu sheet is updated.
Figure 7-57: The Measurement menu sheet
6. In the Measurement menu sheet, enter the name for the
measurement (e.g. My Distance).
7. Select the appropriate measurement tool in the drop-down
menu, next to Tool (e.g. 2D Caliper).
8. Double-click (Name) in the appropriate parameter (e.g.
Distance) and enter a name for the parameter (e.g. My
Length).
If desired change the unit and the number of decimals for
the measurement by double clicking the values under Unit
and Precision (see also "About units" on page 349).
1. Enter a name for the measurement.
2. Select the appropriate measurement tool.
3. Double click and enter the formula name.
To Next Page
Loading...
