Measurement and Analysis
Vivid S5/Vivid S6 User Manual 363
R2424458-100 Rev. 2
To change measurements in quad view
When you view four graphs simultaneously, you can select
which four you want to see. To change each graph in quad
view:
1. On the graph display, use the Trackball to move the cursor
to the small box that is upper left of each graph, then press
SET.
The system displays a list of measurements.
2. Move the Trackball to select the desired measurement and
press
SET.
The system displays the Fetal Growth Curve Graph for the
selected measurement.
To scroll through all Fetal Growth Curve Graphs, adjust the
Graph Change control.
Figure 7-65: Changing a chart in quad view
To edit patient data
When you are working with graphs, you can change or enter
the following patient data.
• GA (LMP) - this field is computed using the LMP date on
the Patient Data Entry screen. To change this field:
Note: You can only change this field on the Fetal Growth
Curve Graph in single view.
• Move the Trackball to the field, which is left of the graph.
To select the field press
SET.
The system displays a window with the GA weeks and
days.
• To select each field, move the Trackball to the field and
press
SET.
To Next Page
Loading...
